Tankless Water Heater Repair Smyrna GA

Tankless Water Heater Repair Smyrna GATroubleshooting

Normally, most of the problems that may occur with a tankless water heater, causing it to need a repair are external factors. Below are a few of them:Tankless Water Heater Repair Smyrna GA

  • The venting is not proper. The most common error is the use of normal B-vent, which can swiftly damage the heat exchanger due to acidic condensation.
  • Check the gas supply line. Occasionally the supply line is undersized and was simply attached to the existing line size. The size specified in the setup manual has to be utilized.
  • The gas pressure is not appropriate. The working pressure needs to be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the model.
  • The incorrect kind of gas that is being used – natural gas or liquid propane. It is not possible to use the non-specified kind.
  • Water flow or temperature change concerns. There are a number of things we will inspect to make certain they are working appropriately, like cleaning or changing the input filter, analyzing the check valve, examining the seals in the faucets and looking to see if there is a cross flow someplace that should be taken care of.
  • Hard Water Problems: In locations where the water is very hard, de-scaling will be needed periodically.
  • Environmental issues. The heaters ought to be set up in a clean area with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Back to Water Heater Repair Smyrna GA